Plates & Bars
PLATES / SHEETS / COILS / ROUND BAR / FLAT BAR / ANGLE / BEAMS / CHANNEL
PLATES / SHEETS / COILS / ROUND BAR / FLAT BAR / ANGLE / BEAMS / CHANNEL
| PLATE / SHEET / COIL | |
| Type |
COLD ROLLED / HOT ROLLED / PERFORATED /
CHECKERED / QUENCHED AND TEMPERED BOILER PLATES / SHIP BUILDING STEEL PLATES / HIC PLATES / FINE GRAIN STRUCTURAL STEEL PLATES / MANGANESE STEEL PLATES / TM ROLLED PLATES / WEAR RESISTANT STEEL PLATES / TEAR PLATES / STRUCTURAL STEEL PLATES / HIGH YIELD QT STEEL PLATES / OFFSHORE QUALITY STEEL PLATES / PLATES ACC. ASME SPEC |
| Wall Thickness | 0.5 mm - 200 mm |
| Surface Finish | No.1, 2B, 4B, Hair Line, B.A. |
| Carbon Steel | A516 Gr.60 / 65 / 70, A283 Gr.C |
| Stainless Steel | A240 / SA480 TP 304/L 310 316/L 321 904L |
| High Temperature Alloy Steel | A387 Gr.1 / 11 / 12 / 22, 13 Cr Mo 44 / 10 Cr Mo 9 10 / 16 Mo3 |
| Duplex & Super Duplex | UNS S31254 UNS S31803 UNS S32750 & S32760 |
| High Alloys | ALLOY 20 ALLOY C ALLOY C276 ALLOY B2 |
| TITANIUM | GRADE 1, GRADE 2, Ti Al 6 - 4V, BT1-0 AND OTHER GRADES |
|
HIGH TENSILE WIND TOWER PLATES/SHEETS/COILS |
ISO EN10025 S355N
J2G3,J3G3,JRG3 CUT TO SHAPES ARE AVAILABLE AS PER DRAWINGS |
| ANGLE BAR / FLAT BAR | |
| Size Range | 1/2" - 150mm |
| Thickness | 1/16" - 15mm |
| Stainless Steel | A276 TP 304/L 310 316/L 321 |
| High Temperature Alloy Steel | 13 Cr Mo 44 / 10 Cr Mo 9 10 / 16 Mo3 |
| BEAMS & WIDE FLANGE | ALL GRADES AND SIZES |
| HEA, HEB, HEM, IPE, UNP / UPE | |
| ROUND BAR / SHAFT | |
| Size Range | 2 mm - 800 mm |
| Carbon Steel / Alloy Steel | A105 A182 F1/T11/T12/T22 DIN17175 13 CrMo44 /10 Cr Mo9-10 |
| Stainless Steel | SS304/L 310 316/L 321 |
